Looking for something that will really spruce up your old 6.4? Then check out Dynomite Diesel’s 6 or 7 hole custom size nozzle set. These are intended for 650-1,500+ RWHP applications with a nozzle size of 15% over to 100% over or greater. Whether you need to tow a trailer with your daily driver or have a racing setup, you’ll find it here, with better throttle response and fueling control.
According to Dynomite, “NOT intended for street use! Competition / Off-road use only. Excessive smoke, excessive exhaust gas temperatures, and higher potential for engine damage will result from installation. It is your responsibility to ensure you have the appropriate modifications to take advantage of the fuel these nozzles can deliver. Vehicle modifications should include (but are not limited to): Dual High Pressure Fuel Pumps, Lift Pump Upgrade, Upgraded Turbocharger(s), Custom Tuning, Head Studs, etc.”
Included with the nozzle set are 8 new injector sealing washers. Dynomite recommends that you send your injectors to them to be inspected to ensure that there aren’t any issues that would cause problems down the road. “After testing we will install the nozzles then retest the injectors and balance them to perfection.”
The nozzles are covered by a one-year unlimited mile warranty. Due to their custom nature, all sales are final and returns are not allowed. For more information, call (208) 209-3214 or visit www.dynomitediesel.com.